All wetted parts of valves which come in contact with liquids are in polypropylene or PVDF.
Jyoti Plastics strength lies in its inherent capability to design-manufacture-assemble-test and deliver under ISO 9001-2000 quality standards.
Parts are manufactured on sophisticated injection molding machines using State-of the art technology.
TYPE : Diaphragm Valve (Neoprene / Teflon coated)
Complete PP valves with Neoprene diaphragm or Teflon coated diaphragms.
Available in sizes from ½”NB to 6”NB in flanged as well as screwed connections.
Flanges will be as per ASA ,BS or DIN stds.
Are generally used for fluid controls in corrosive environment in horizontal pipe lines.
TYPE : Ball Valve
These valves are generally complete PP valves with teflon coated diaphragms.
Available in sizes from ½”NB to 6”NB in flanged as well as screwed connections.
Flanges will be as per ASA ,BS or DIN stds.
Are generally used for fluid controls in corrosive environment in horizontal pipe lines where frequent open/shut of valves is required to be done
   
   
   
TYPE : 'Y' Type Valve
These valves are generally complete PP valves .
The Y type valves are fitted as per the pipe line specs where access to handle to difficult.
Strainer are basically a coarse filter in pipe line where particles up to 1mm can be trapped.
These are available from 1”nb to 4”nb in flanged connections only.
   
   
   
TYPE : Foot Valve
SIZE : 1/2" to 4 "
MOC : All wetted parts PP/PVdf
END TYPE : Flanged
 
   
all rights reserved copyright 2007 Jyoti Plastic Works Pvt.Ltd.   Disclaimer